Maintenance And Cleaning; Disposal - Classic Fire Lugano Bedienungs- Und Sicherheitshinweise

higher room temperature.
• Now the heating thermostat function begins automatically.
• As soon as the set room temperature is reached, the heating function of your electric
fireplace insert switches off automatically.
• As soon as the set room temperature falls short, the heating function of your electric
fireplace insert switches on automatically.
• Set the switch 7 to position 0 in order to turn of the heating function.
• Set the ON / OFF switch 6 to position 0 if you would like to turn off the flame simulator.
• Close the cover 3.

Maintenance and cleaning

WARNING! DANGER TO LIFE BY ELECTRIC SHOCK! Before conducting cleaning or
maintenance work please pull the power plug out of the outlet.
ATTENTION! DANGER OF BURNING! It is imperative to let the unit completely cool off
before any work is done on it.
CAUTION: Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
Cleaning and user maintenance shall not be made by children unless they are older than
8 years and supervised.
Cleaning the housing
• In no case should aggressive or corrosive cleaning agents be used. Otherwise
damage to the product could result.
• Clean the housing and glass with a slightly dampened cleaning cloth only.
• Clean the ventilation slots regularly and thoroughly, so that no dust can accumulate.
WARNING! Only let the unit be repaired by the manufacturer, its service agent or similarly qualified
persons using only original spare parts.

Disposal

All the packaging and packaging material consist of environmentally friendly
materials. They can be disposed of in local containers.
The symbol above and on the product means that the product is classed as
Electrical or Electronic equipment and should not be disposed with other
household or commercial waste at the end of its useful life.
The Waste of Electrical and Electronic Equipment (WEEE) Directive has
been put in place to recycle products using best available recovery and
recycling techniques to minimise the impact on the environment, treat any
This ensures that the safety of your unit is maintained.