Guarantee Conditions - Newa Pond FONTANA advance series Gebrauchsanleitung Und Garantie

MAINTENANCE
Rotating parts need to be regularly accessed for
cleaning. To this purpose it is recommended to not use
any chemical detergents.
FONTANA adv 800/1200: follow the instructions on
page 40. Remove the impeller chamber, take out the
rotor and proceed with cleaning.
FONTANA adv 2300/3000: follow the instructions on page
42. Unfasten the screws, remove the impeller chamber,
and take out the rotor and proceed with cleaning.
FONTANA adv 4500/6000/8000: follow the instructions
on page 44. - FONTANA adv 8000: after having carefully
positioned the pump on the rear cover, remove the
screws. Keep the impeller disc attached to the pump
motor unit, using one of the free eye bolts. Remove the
impeller chamber by pushing the outlet pipe towards the
work surface (Fig.8 page 44). Take out the rotor with the
impeller and proceed with cleaning.
Replace all parts in reverse order:
impeller chamber in its seating, ensuring that the bushing
is positioned correctly on the bottom of the well. When
re-inserting the rotor, pay attention to its magnetic power
in order to avoid any damage and injury to the fingers.
FONTANA adv 4500-6000-8000: Turn the impeller disk,
paying attention to follow the reference marks placed
on the impeller and on motor body of the pump (Fig.12
page 44). Using the screws, fix the impeller chamber to
the pump in the position indicated in Fig.15 on page 45.
FONTANA adv 8000: Place the impeller chamber making
sure that the screw lodging is not next to the fastening
eyelets. Rotate it clock-wise until the stop, then insert
the screws and screw to fasten it (Fig.14 page 44).
Put the sponge back onto the pump. Put the pump
with the sponge back into the shell, inserting it into the
special slides positioned inside. Close the pump with the
remaining shell and fasten the screws.
ATTENTION: The rotor is provided with a ceramic shaft,
that is wear-resistant, but fragile. Pay utmost attention
during maintenance operations.
TROUBLE-SHOUTING GUIDELINES
If there is insufficient water coming out of the pump:
• Check that the pump intake is clean and without any
obstructions
• Check that there are no kinks in the connected tubes
If the pump stops working:
• Check that the pump is correctly powered.
• Make sure that the water level is not too low. The intake
tube of the pump must be below the water level both on
submerged and external applications.
• Check that the rotor doesn't have any obstructions
FONTANA adv 800: the motor is self-protected against
uncharacteristic overheating caused by misuse,
running-dry or jammed rotor.
English
FONTANA adv 1200-2300-3000: the pump is provided
with a self-resetting thermal protector. If the pump
stopped working, please investigate if the thermal
cut-off has been activated by first disconnecting the
appliance from the electrical supply for approximately
1 hour, then remedy the cause that made the appliance
stop, and reconnect to the socket again.
FONTANA adv 4500-6000-8000: the pump is provided
with an electronic device for rotation control and this
is also able to evaluate the functioning conditions.
If there is lack of water or blocked rotor the pump
recognizes the problem and stops. After 10 attempts
(FONTANA adv 8000: 5 attempts) to start again, in the
space of 1 minute, the pump turns off completely. In
this case unplug and remove the cause of the problem.
After re-connecting the pump,it will resume working.

GUARANTEE CONDITIONS

This appliance is guaranteed from defects in its materials
re-introduce the
and workmanship for a period of 3 years from the date
of purchase. If the appliance should not work correctly as
from the purchase date, return it to your local retailer. The
appliance will be replaced without any additional charge.
To use the guarantee service, return the appliance and
attach the proof of purchase and a detailed reason for
the claim. The appliance must be carefully packed and
protected from any damage during transport. The guarantee
does not cover damage due to impact or being dropped
after purchase. The guarantee is not valid if the product
is used incorrectly or if damage is caused by tampering
or negligence by the purchaser causing the loss of fish
or other animals, personal damage, loss of properties or
other damage that might arise. The guarantee is not valid
for components subject to wear and tear (see * page 46).
CORRECT DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)
(Applicable in the European Union and other European
countries with separate collection systems). This marking
shown on the produci or its literature, indicates that it
should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse
of material resources. • Household users should contact
either the retailer where they purchased this product, or
their local government office, for details of where and how
they can take this item for environmentally safe recycling.
• Business users should contact their supplier and check
the terms and conditions of the purchase contract. This
product should not be mixed with other commercial
wastes for disposal.