Stem IZON VIEW Bedienungsanleitung Seite 4

UNPACKING AND INITIAL SETUP
1. Remove IZON VIEW from the box. Keep original packaging
for the warranty period and then properly dispose. (Please
recycle).
2. Attach IZON VIEW to the magnetic base and place on a
level surface and pivot the camera to the preferred
viewing position. Be sure to read, review and follow the
precautions listed in the enclosed Stem warranty and
product safety information.
3. Remove USB cable and power adaptor from the packaging.
Connect the mini-USB end of the included cable to the
port on the rear of IZON VIEW labeled POWER . Connect
the full- size USB end of the cable to the USB port on the
power adaptor.
4. Plug the power adaptor into a wall outlet. The small LED
display on the front of IZON VIEW should glow an amber
color to indicate that it is powered.
Using a compatible iPhone, iPad, or iPod touch, download
5.
the free IZON App from the App Store. Once your
download is complete, open the IZON App and follow the
simple instructions to complete setup and begin using
your new IZON VIEW app-controlled camera.
US-EU-p2
2
04/26/2013