Description Of The Programmer: Series 905-Pc - Alcad 905-PC Series Installationsanleitung

NOTE: It is necessary to connect a monochannel amplifier to the output of
a channel processor.
3.4 Supplying power to the equipment
Connect the equipment to the mains supply only when all the RF connections
and feeds to the modules have been made. To supply power to the
equipment it is necessary to connect all the modules to the ZP-004 support
frame (code: 9050001), which grounds the equipment.
4. DESCRIPTION OF THE PROGRAMMER: 905-PC
SERIES
Select the SERIE 905-PC in the PS programmer.
Mode
Output channel B/G CCIR
Output frequency
Input channel B/G CCIR
Input frequency
Input offset
Output offset
Table channels
FUNC. SCREEN
!"
Analogue
!"
Output channel Selects the C/21 output channel in the table
OUTPUT B/G CCIR C21 of channels B/G CCIR.
!"
Output frequency Select the frequency of the video carrier
OUTPUT 471.25 MHz
!"
Input channel Selects the C/21 input channel in the table.
INPUT B/G CCIR C21 of channels B/G CCIR.
!"
Input frequency Select the frequency of the video carrier
INPUT
471.25 MHz
!"
Input offset Select the offset adjustment of the channel or
I OFFSET
0 MHz
!"
Output offset
O FFSET
0 MHz
SERIE 905-PC
Tab. 1 - Data
DESCRIPTION
Adjust the CAG according to whether you are
processing an analogue or digital channel.
output in analogue mode or central frequency
in digital mode.
input in analogue mode or central frequency
in digital mode.
input frequency in digital mode.
Select the offset adjustment of the channel or
output frequency in digital mode.
Digital
C21
474 MHz
C21
474 MHz
+1/6 MHz
+1/6 MHz
B/G CCIR
ENG - 21
T
T
T
T
T
T
T