Iomega ditto Installation Seite 7

4 Unfold the tape cable and note the stripe on the edge
of the cable.
Installing a Ditto Dash DX Accelerator Card Installing a Ditto Dash DX Accelerator Card
Installing a Ditto Dash DX Accelerator Card
Installing a Ditto Dash DX Accelerator Card Installing a Ditto Dash DX Accelerator Card
If you did not purchase a Ditto Max tape drive, go directly to
step 10. If you did purchase a Ditto Max tape drive, you
received an additional piece of hardware—a Ditto Dash DX
accelerator card. You should now install the Ditto Dash DX.
5 Locate a vacant 16-bit expansion slot and remove the
expansion slot cover.
6 Find the colored stripe on the edge of the tape cable.
1-Connector End
Computers have either
VERTICAL or HORIZONTAL
expansion slots.
Expansion
Slot Cover (remove)
Use the 16-bit expansion slot
Stripe
2-Connector End
7