HAWA Concepta 40/50 Montageanleitung Seite 32

HAWA Concepta 40/50
Hard slamming of the
door at the back of the
niche.
Or
Door does not move
completely into the
niche.
Door pulling speed is
too high or varies from
door to door
32/40
Adjustment of the rear Correct damper position.
lower damper is not cor- 1. Remove the stop cover caps
rect. 2. Release upper stop damper
3. Pull the upright in front of the
4. Reassemble the lower stop
Reduce the opening angle of the
extended door.
This causes the door to run on the de-
flection roller and it is slowed down.
cabinet
a) Slide the damper to the top
b) Slide the damper to the
bottom
damper and stop cover caps
according to the instructions