Omnitronic GM-110 Bedienungsanleitung Seite 2

Dynamic Gooseneck Microphone
The OMNITRONIC models
gooseneck microphones with supercardioid characteristic and are ideally
suited for lectures in conference facilities and DJ applications. They can
be directly inserted into an XLR microphone connection or used as
a desktop microphone together with the optional microphone base
GMTS-100 .
Safety Instructions
! Maintenance and service operations are only to be carried out by
authorized dealers. Damage, caused by manual modifications on this
device is not subject to warranty. If the microphone is used for other
purposes than originally intended or if it is not correctly connected, the
product may suffer damages and the guarantee becomes void.
! Protect the microphone against humidity and heat. The ambient
temperature must always be between -5° C and +45° C.
Setting Into Operation
Insert the microphone into an XLR microphone input or a microphone base.
Adjust the gooseneck so that the microphone points directly at the sound
source (speaker).
Cleaning
For cleaning the microphone only use a dry cloth. Never use chemicals or
water.
Technical Specifications
Item number:........................80800260, 80800265
Type: ....................................Dynamic
Polar pattern: ......................Supercardioid
Frequency response:..........50 Hz - 16 kHz
Sensitivity: ........................... -52 dB ± 3 dB
Output impedance: .............600
Output:..................................3-pin XLR, balanced
Dimensions:.........................Ø 455 x 20 mm
Weight: .................................300 g
Accessory : ...........................60006100
...............................................GMTS-100 Mic table stand XLR
Every information is subject to change without prior notice. 2012 ©
GM-110 and GM-150
W, ± 30% at 1 kHz
are dynamic