Installation
1)
Connect power adapter DC plug to
AirVideo-2000 DC jack and other side
to AC jack.
2)
Connect Projector's VGA cable to
AirVideo-2000 VGA connector on the
rear panel.
3)
Turn on projector
4)
Turn on AirVideo-2000 device
After system ready, the "POWER" LED and "WLAN" LED will be yellow color. The
"LAN" LED will be off.
When LAN connection is established, then "LAN" LED will be yellow color and blinking
while data
English
4
transmission.
AirVideo-2000