Mounting Bell; Mounting Impact Protection; Mounting Brakes - X-BIKE IAN: 66951 Bedienungsanleitung

7 Mounting Bell (optional)
Loosen the screw on the bell (Q), attach the bell on the left
handlebar and then tighten the screw.
8 Mounting Impact Protection (P)
Pull the Velcro straps around the recesses on the
fork.
9 Mounting Brakes (optional)
WARNING!
If you decide to mount the brake, it must always be adjusted properly
(see seetings, page 50).
9a) Remove the screw from the brake lever
(R), attach the brake lever on the right
handlebar and then tighten the screw.
9b) Hook the brake cable (S) in the lower
intake of the brake arm.
Fig. 7
Fig. 8
Fig. 9a
Fig. 9b
Brake Arm
47