KERN EG-A04 Installationsanleitung Seite 5

GB
KERN EG-A04 for models with max ≤ 820 g
How to remove the case:
• Disconnect the balance from the mains
• Remove weighing plate (1) and carrier of weighing plate (2)
• Remove both screws to the left and right of the bracket guide (3)
• Release both retaining hooks (6) on the lower housing section (5) and care-
fully remove the upper housing section (4) to the rear (please observe the up-
per housing section guides on the back of the balance).
EG-A04-IA-defsi-0610
KERN EG-A04
Version 1.0 04/2006
Installation Instructions
Rechargeable battery
5