Mitsubishi Electric VS-60HS12U Bedienungsanleitung Seite 7

Troubleshooting (continued)
Problems
A blue light When the LED fails to illuminate or a failure occurs in the product, a blue light
blinks without blinks. In such a case, check the state of the blinking blue light (and the state
image display. of the status display on the terminal panel) according to the following table.
blinking blue light
Light on for 1 second,
off for 1 second
Light on for 5 seconds,
off for 1 second
Light on for 1 second,
off for 5 seconds
State of the State of the
status display
STATUS
STANDBY
STATUS
STANDBY
Any of 1 to 7
STATUS
STANDBY
STATUS
STANDBY
Any of 1 to 4
STATUS
STANDBY
STATUS
STANDBY
Any of 1 to 6
STATUS
STANDBY
STATUS
STANDBY
Any of 1 to 3
STATUS
STANDBY
STATUS
STANDBY
STATUS
STANDBY
STATUS
STANDBY
Any of 2 to 4
Remedies
Causes and solutions
The LED has failed to illuminate.
Contact your MITSUBISHI dealer.
The cooling fan has failed.
An abnormal temperature rise has
occurred.
Check the ambient temperature and
make sure that the intake is not
blocked.
Contact your MITSUBISHI dealer.
The power circuit has failed.
Contact your MITSUBISHI dealer.
The image processing circuit has failed.
Contact your MITSUBISHI dealer.
The system processing circuit has failed.
Contact your MITSUBISHI dealer.
EN-7