Operation - Use - Bestron VIVA ITALIA AMF8050 Bedienungsanleitung

OPERATION - General
The appliance is intended only for
domestic use, not for professional
use.
1. Lid
2. Max. level of warm milk
3. Max. level of milk foam
4. Min. filling level
5. Axle
6. Can
7. On/off switch
8. Power base
9. Power cord and plug
10. Froth beater
OPERATION - Before first use
1. Take the appliance out of the packaging.
2. Clean the appliance (see 'Cleaning and maintenance').

OPERATION - Use

With this milk frother you can:
Frothing milk
1. Place the froth beater (10) on the axle (5).
2. Pour the milk in the can (6) (no more than the lower MAX-indication
3. Put the plug (9) into the wall socket and place the can on the power base (8).
4. Switch the on/off switch (7) to 'I'. The pilot light will illuminate and the appliance starts working.
5. The appliance switches off by itself when the milk has been frothed.
6. Remove the can from the power base and pour the milk.
7. If the milk is not or not completely poured from the can, the appliance will start working again when the
temperature of the milk drops below 50°C.
8. After use, turn the on/off switch to '0' and remove the plug from the wall socket.
Warming milk
1. Take the froth beater (10) from the axle (5).
2. Pour the milk in the can (6) (no more than the higher MAX-indication) and place the lid (1).
3. Put the plug (9) into the wall socket and place the can on the power base (8).
4. Switch the on/off switch (7) to 'I'. The pilot light will illuminate and the appliance starts working.
5. The appliance switches off by itself when the milk has been heated to 65°C.
6. Remove the can from the power base and pour the milk.
7. If the milk is not or not completely poured from the can, the appliance will start working again when the
temperature of the milk drops below 50°C.
8. After use, turn the on/off switch to '0' and remove the plug from the wall socket.
1
2
3
4
5
6
7
8
24
MAX
MAX
MIN
) and place the lid (1).
EN
9
10