Adjustment Of Colour, Contrast, Brightness - Dietz Imu 1422 Bedienungsanleitung

14

Adjustment of colour, contrast, brightness

These adjustments can be made with a bridge from the respective solder pad to + or –.
1: S=colour saturation
2: K=contrast
3: H=brightness
E
N
G
L
I
S
H
ATTENTION!
While a video (CVBS) signal is fed in, the multimedia interface is activated! Therefore, it is always
switched on or off simultaneously with the connected source. For this reason the connected source
should always be connected with the signal for ignition, avoiding an empty battery. The multimedia
interface is able to process PAL as well as NTSC. Switching is done automatically.
®
Copyright © by Audiotechnik Dietz Vertriebs-GmbH ● Germany
Rev 1, Stand: 09/ 2009