Using A Memory Card; Technical Specifications - Modecom FREETAB 1002 IPS X2 Kurzanleitung

MODECOM frEEtab
2.2.2 Turn off
To power off your tablet, press and hold the power button until the
"Would you like to shut down?" dialog appears and tap "OK" to power
it off.
2.3 Lock/unlock the screen (sleep mode)
To save battery, you should put your tablet in sleep mode by turning
off the LCD display. To do this, shortly press the power key. Press it
again to wake up the screen.
2.4 Connect to computer
You can connect your tablet to your computer with the supplied
USB cable so you can transfer media files.

3. Using a memory card

3.1 Insert the micro SD memory card to the device
The device supports micro SD cards in standard SD / SDHC
To insert the card, set the connector tab toward the front of the unit
(printed toward the back of the unit)
To remove the card, press the edge of the card to release
card to release the safety and pull the card out of the slot
Warning: When you load a file with the micro SD card, it can not
be removed from the slot and can cause a malfunction
4. T echnical Specifications
Procesor
Operating system
Memory RAM
Memory Flash
Card reader
Touch panel
4
DualCore Rockchip RK3066 (1.6 GHz)
2x CPU / 4x GPU (Mali-400)
Android 4.1 (Jelly Bean)
1GB DDR3
16GB Flash MLC
microSD/SDHC (do 32GB microSDHC)
Capactive (10 points)
www.modecom.eu
the