Network Configurations - Belkin F1DP116sea Installationsanleitung

Network Configurations

Identify Your IP Address
To identify the IP address on your network, use the MAC address located on
zthe back of the Console Server. If no DHCP server is found on your network, the
Console Server will boot with the following static IP address: 192.168.2.156.
Assigning IP from the Console Port VT-100 (Console, Telnet, SSH)
1.
Connect the console port on the rear panel to a serial port on a PC host using the
CAT5 cable and the console port adapter, included with the Belkin Console Server.
2.
Configure a terminal emulation program, such as
HyperTerminal, using the following parameters:
•
•
•
•
•
Network > IP Config
3.
Enter IP Config for network settings.
5599ea_F1DP116Sea_QIG_ea.indd 4
Baud rate = 115200
Data bits = 8
Stop bits = 1
Parity = none
Flow control = none
Default user
name/password:
admin/admin
8/1/08 4:10:04 PM