Installing And Charging The Battery - Symbol WSS 1000 Kurzübersicht

4

Installing and Charging the Battery

The wrist computer and scanner are powered by a
Lithium-Ion battery pack. The pack provides power for a
typical 8-hour shift.
Before using the wrist computer, install and ful-
Note:
ly charge the Lithium-Ion battery pack.
To install the battery pack in the WWC 1000:
1. Insert the battery pack, base first, in the battery
compartment.
Battery Pack
Base
2. Line up the pack's locking mechanism with the
notch in the battery compartment wall by sliding the
battery latch, and press the pack into place.
3. Release the battery latch to lock in place.
Quick Reference
Battery
Compartment
Battery
Latch
Notch