Notes On Safety; Symbols; General Safety Instructions For Power Tools - Deltafox DP-CRS 2022 Originalbetriebsanleitung

GB
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool
is turned off and times when the
tool is turned on but is running
idle).

Notes on Safety

This section details the basic safety in-
structions for working with the appliance.

Symbols

Symbols on the Equipment
Caution!
Read through the instruction man-
ual carefully.
Wear eye protection.
Wear ear protection.
Wear breathing protection.
Wear cut-resistant gloves.
22
Keep other people away from the
device.
Keep hands away from the sawing
area.
Always remove the rechargeable
battery before carrying out work
on the device. Risk of injury!
Electrical appliances must not be
disposed of with the domestic
waste.
Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.
Instruction symbols (the instruc-
tion is explained at the place of the
exclamation mark) with information
on preventing damage.
Help symbols with information on
improving tool handling.
General safety instructions for
power tools
WARNING! Read all safety direc-
tions and instructions. Omissions
in the compliance with safety
directions and instructions can
cause electrical shock, fire and/or
severe injuries.
Retain all safety directions and instruc-
tions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.