Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
1.
Remove all packaging materials and any promotional stickers.
2.
Before connecting the appliance to the power net, leave it standing upright for about 2 hours. This
reduces the risk of any malfunctioning of the cooling system due to transportation.
3.
Clean the inside of the wine cooler with lukewarm water and a soft cloth.
4.
Place the appliance on a firm, steady surface, that is strong enough to carry a filled wine cooler. To
level the appliance, you can adjust the front support feet at the bottom of the appliance.
5.
Do not place the appliance directly into sunlight or near heat sources. Direct sunlight could affect
the coating of the appliance and the proximity of heat sources may cause an increase of the energy
consumption. Extreme temperatures may also cause malfunctioning of the appliance.
6.
Make sure that the air can circulate around the appliance. Therefore, leave a free space of at least 5
cm between the appliance and any other object.
7.
The cord should not be exposed or left hanging loose to prevent possible accidents.
Make sure that the room temperature lies between 10°C and 26°C. If the
temperature is higher or lower, the performances of the appliance may be
affected. The temperature may vary depending on whether the bottles are on
the upper, middle or lower racks and whether the inside lighting is on or not.
HANDLE
Attach the handle to the door with the supplied screws.
1.
Seal
2.
Screws
3.
Door
4.
Handle
USE
CONTROL PANEL
1
A: upper zone
B: lower zone
1.
Button for Celsius/Fahrenheit
2.
Button to raise the temperature
3.
Button to lower the temperature
4.
Display
5.
On/off button of the light
20
DO925WK
LOGO: 1, black color 2, silk-scream prnting
A
2
3
416mm
B
4
2
3
1
2
5
41.6mm
19.2mm
3
4
22mm
54.2mm
10.2mm
Werbung
Inhaltsverzeichnis
