Installing Os On A Hdd Larger Than 2Tb In Raid Mode - ASROCK Z77 Extreme3 Handbuch

Installing OS on a HDD Larger Than 2TB in RAID Mode

This motherboard adopts UEFI BIOS that allows Windows
large size HDD (>2TB). Please follow the procedures below to install the operating
system.
1. Please make sure to use Windows
®
Windows 7 64-bit or Windows
®
2. Copy Intel RAID drivers into a USB flash disk. You can download the driver from
ASRock's website and unzip the file into a USB flash disk OR copy the file from
ASRock motherboard support CD. (please copy the files under following directory:
32 bit: ..\i386\Win7_Vista_Intel..
64-bit: ..\AMD64\Win7-64_Vista64_Intel..
3. Create RAID array for you system. Please refer to "Intel RAID Installation Guide"
file for details.
4. Install Windows
A. Insert your Windows
drive.
B. Press <F11> to launch boot menu at system POST and choose the item
"UEFI:xxx" to boot.
C. Start Windows
Windows?" page, please click "Load Driver".
D. Plug the USB flash disk into your USB port; select "Browse" to find the RAID
driver. Then choose the directory (xx\AMD64\) you have copied in the first
step.
166
®
®
8 64-bit.
® TM
Vista 64-bit / 7 64-bit:
® TM
Vista 64-bit / 7 64-bit installation disc to the optical
®
Installation. When you see "Where do you want to install
ASRock Z77 Extreme3 Motherboard
®
OS to be installed on a
TM
Vista 64-bit (with SP1 or above),