System Requirements; Specification - i-tec Aduance Serie Benutzerhandbuch

Quick Start
This is the USB 3.0 HUB for easy connection up to 4 USB devices (USB 3.0/2.0/1.1) to your
computer via one USB cabel. You can extend length of connection by extra USB cable type A-
Male / Type A Female (note: extra cable is not part of package).
INSTALLATION IN WINDOWS XP/ VISTA/ 7 /8, MAC OS X AND HIGHER
USB HUB is installed automatically, no need install drivers. Plug the USB HUB (by using USB
cable) into available USB port (USB 3.0, 2.0 or 1.1 standard) of your PC and follow the on-
screen instructions. USB HUB will be installed and displayed in Device manager as "Generic
USB HUB" and "USB 3.0 HUB".

SYSTEM REQUIREMENTS

Hardware requirements
PC or notebook with one available USB portem
Operating system
Windows XP, Windows Vista, Windows 7 32/64bit, Windows 8 32/64bit, Mac OS X 10.x or
higher

SPECIFICATION

 4x USB 3.0 port
 4x downstream (for connection USB devices) USB port, 1x upstream (for connection to PC)
 Transfer rate up to 5 Gbps
 Plug & Play function
 Storage temperature -10~85 °C
 Working temperature 0~40 °C
 OS Windows XP, Vista, 7 32/64bit, 8 32/64bit, Mac OS X 10.x or higher
 Product size 137,5 (L) x 31,5 (W) x 22 (H) mm
 Product weight 83 g
PACKAGE CONTENTS
 USB 3.0 4-port HUB
 User's Guide
FAQ
Question: USB 3.0 4-port HUB is not installed automatically immediatelly after connection.
Answer: Device should be installed automatically in supported OS. By the way, if installation
doesn't start, reboot your computer. After rebooting PC, device installation starts.
Question: I have some problems with detection and installation of HUB.
Answer: Install the latest drivers for USB 3.0 interface of your PC/NB.
Question: I have some problems with detection and installation of USB 2,5" HDD case
Answer: Use additional power for USB 2,5" HDD case or restart PC.
EN
03