Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electric Drives
and Controls
Hydraulics
Appendix to Declaration of Incorporation:
Essential health and safety requirements in accordance with Machinery Directive 2006/42/EC,
Appendix I
Notes:
"Applied" means that the requirement is used and relevant to the product ("X" identifier appears under "applied").
o
Requirements with identifier "-" under "applied" are not used and are not relevant to product.
o
The following identifiers under "fulfilled" mean: "X" = "yes, fulfilled" and "-" = "not fulfilled"
o
No.
Requirement
General principles
1.
Risk assessment and risk reduction
1.
Essential health and safety requirements
1.1
GENERAL REMARKS
1.1.1
Definitions
1.1.2
Principles of safety integration
1.1.3
Materials and products
1.1.4
Lighting
1.1.5
Design of machinery to facilitate its handling
1.1.6
Ergonomics
1.1.7
Operating positions
1.1.8
Seating
1.2
CONTROL SYSTEMS
1.2.1
Safety and reliability of control systems
1.2.2
Control devices
1.2.3
Starting
1.2.4
Stopping
1.2.4.1
Normal stop
1.2.4.2
Operational stop
1.2.4.3
Emergency stop
1.2.4.4
Assembly of machinery
1.2.5
Selection of control or operating modes
1.2.6
Failure of the power supply
1.3
PROTECTION AGAINST MECHANICAL HAZARDS
1.3.1
Risk of loss of stability
1.3.2
Risk of break-up during operation
1.3.3
Risks due to falling or ejected objects
1.3.4
Risks due to surfaces, edges or angles
1.3.5
Risks related to combined machinery
1.3.6
Risks related to variations in operating conditions
1.3.7
Risks related to moving parts
1.3.8
Choice of protection against risks arising from moving parts
1.3.8.1
Moving transmission parts
1.3.8.2
Moving parts involved in the process
1.3.9
Risks of uncontrolled movements
1.4
REQUIRED CHARACTERISTICS OF GUARDS AND PROTECTIVE DEVICES
1.4.1
General requirements
1.4.2
Special requirements for guards
1.4.2.1
Fixed guards
1.4.2.2
Interlocking movable guards
1.4.2.3
Adjustable guards restricting access
1.4.3
Special requirements for protective devices
1.5
RISKS DUE TO OTHER HAZARDS
1.5.1
Electricity supply
1.5.2
Static electricity
1.5.3
Energy supply other than electricity
1.5.4
Errors of fitting
1.5.5
Extreme temperatures
1.5.6
Fire
1.5.7
Explosion
1.5.8
Noise
1.5.9
Vibrations
1.5.10
Radiation
1.5.11
External radiation
1.5.12
Laser radiation
1.5.13
Emissions of hazardous materials and substances
1.5.14
Risk of being trapped inside a machine
1.5.15
Risk of slipping, tripping or falling
1.5.16
Lightning
Linear Motion and
Assembly Technologies
Pneumatics
Service
Applied
Fulfilled
-
-
X
-
-
-
-
-
-
-
-
-
X
-
X
X
-
-
X
X
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
X
-
X
X
X
-
-
-
-
-
-
-
X
-
X
-
X
-
-
-
X
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
X
X
X
X
-
-
X
-
X
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Page 2 of 4
Werbung
Inhaltsverzeichnis
