G-Lab MD2200 Gebrauchsanweisung Seite 56

This monitor has 2 methods to delete the recorded memory.
(A) To delete one single record
1. Select the record you want to delete
2. Press and hold [+/M] button until the screen display "CL" and "--"
3. Press [ ] button to confirm and the screen will display "CL" and "00"
(B) To delete all memories
1. Press the [+/M] button to enter average mode
2. Press and hold [+/M] button until the screen display "CL" and "--"
3. Press [ ] button to confirm and the screen will display "CL" and "00"
TO DELETE MEASUREMENT DATA
56