Display Brightness Selection Menu; Remote Control Code Selection Menu - Gicam VIS100HE Installations- Und Bedienungsanleitung

Display brightness selection menu

Display brightness
LuMin
In this sub-menu it is possible to adjust the brightness of the display. Programming a
low value, the display will be at minimum brightness, whilst programming a high value
you will have a more intense brightness. It is possible to set the value AUTO, which
allows the instrument to auto-adjust the brightness of the display according to the pre-
sent ambient light.

Remote control code selection menu

Code remote control
rAdio
This sub-menu is protected with a password (1410).
In this submenu it is possible to chose the code that identifies the remote control used
to control the instrument. The available codes are: 0001, 0010, 0011, 0100, 0101, 0110,
0111, 1000, 1001, 1010, 1011, 1100, 1101, 1110, 1111.
Set the first 4 contacts of the radio-control dip-switch according to the selected code.
Pagina – page – Seite 30