Troubleshooting - Asus O!PLAY MINI V2 Schnellstarthilfe

Troubleshooting

The media player does not work. You think that the problem might
be with the media player's power adapter.
The TV screen is blank and the media player power LED remains
off.
I cannot see the Setup Wizard when I power on the player for the
first time. The TV screen is blank and the media player power LED
is on.
u12_oplaymini_v2_qsg.indb 
• The media player's power adapter may have performed the
overload protection feature — automatic shutdown during
improper working conditions, such as too much current and
voltage, or exposure to extreme temperatures.
• Disconnect the media player's power adapter and wait a few
minutes before you reinsert the player's power adapter directly
into an outlet. Power on the media player again.
• If the problem still exists, contact your retailer.
• Ensure that the TV is turned on.
• Ensure that the media player's power adapter and power outlet
are functional.
• Ensure that the media player's power adapter plug is firmly
attached to the rear panel of the player and to the power outlet.
• Ensure that the TV is turned on.
• Ensure that the AV/HDMI cable is properly connected to the
correct terminals on both the TV and the media player.
• Ensure that your TV is set to the appropriate video source (AV
IN or HDMI). You may need to use your TV Remote control to
change video sources.
• Turn off your media player and wait for a few minutes before
turning it on again or press the reset button at the back panel.
Quick Start Guide - 
11/12/1 1::2