Remote Control Functions; Setup Instructions - Marmitek CONNECT 225 Gebrauchsanleitung

12. TV OUT
To connect the TV Scart jack to unit;
13. TV OUT AUX
To connect the auxiliary device's (Audio System, Video sender, Modulator)
Cinch jacks to the unit;

REMOTE CONTROL FUNCTIONS

You can select each Input Channel by using the numerical button on
the remote control unit.
The" " button is located on the Remote Control Unit, which allows
the Connect 225 to be switched in STANDBY .

SETUP INSTRUCTIONS

Connecting the AC power supply unit
1. Connect the AC Power Adaptor plug to the 12V DC INPUT located on the rear panel of
the Connect 225 (6).
2. Connect the AC Power Supply Unit into a suitable wall outlet.
IMPORTANT:
The power supply unit must be the correct type. Do not use a power supply unit
other than the type indicated.
Battery installation
Please draw out the plastic from the remote control.
Connect 225™ 5