English - jbc PK Bedienungsanleitung

We would like to thank you for the confidence you have shown in JBC in
acquiring this equipment. It has been made to the highest quality standards to
provide you with the best service. Before using this equipment, you are
recommended to read these instructions carefully.
SPEClFlCATIONS
Station composition
This SMD surface mounting component
positioner PK 6060 Ref. 6060200 comprises:
- Control unit containing the vacuum pump
and the suction flowrate control circuit.
- Suction pencil with 0.85 mm needle
(rose).
- Manual suction control.
- Suction pencil stand.
Technical data
- Supply 230V, 50Hz, 7VA
- Suction power: minimum 30% vacuum.
OPERATION
Selection of needle and suction cup
Besides the syringe of 0.85 mm which is
suministrated with the vacuum pen, a set of
syringes and suction cups of different
diameters are provided.
SUCTION CUPS
Ref.: 0940163
Ø A
mm
2 x 4,3
2 x 7
2 x 10
Adaptable suction cups to the needles
PICK & PLACE to make easy the placement
in different sizes of SMD circuits.
These accessories will allow you to adapt
yourself better to the size and weight of any
component.
1

ENGLISH

NEEDLES
Ref.: 0901546
Ø B
COLOUR
mm
BLACK 2 x 0,4
YELLOW 2 x 0,55
ROSE 2 x 0,85
Vacuum power
selector
Aspiration inlet