Bahco BCL33IW2 Betriebsanleitung Seite 7

5. SPECIFIC SAFETY RULES AND/OR SYMBOLS
Recycle
....................
Class II Tool
....................
Do not incinerate and put the battery
on fire
..................
Do not wet
....................
a.c. Alternating Current
.................
W Watts
.......................
Hz Hertz
....................
kg Kilograms
....................
Kilograms - Centimeter
kg-cm
......
6. FEATURE
1
2
7. OPERATING INSTRUCTIONS
Removing or Installing Battery Pack
1. Always switch off the machine before insertion or removal of the
2. To remove the battery pack, push the button on the battery pack and
3. To insert the battery pack, align the tool unit slides with the battery
4. Do not force the battery pack in sliding it into tool unit. If the battery
Charging the Battery Pack
1. Connect the plug to the charger before charging.
2. Plug the fast charger into the power source.
3. Slide the battery pack into the charger as the arrow direction shown on the charger.
d.c.
V
/min
mm
ft-lb
3
battery pack.
pull the tool unit from the battery pack in the direction.
pack sliding groove and push the tool unit into place.
The tool unit can be slide into battery pack in two directions.
pack does not slide in easily, it is not being inserted correctly.
• 7
Do not throw in Garbage
....................
Indoor use only
..................
Do not recharge if the battery is broken
or damaged
....................
Risk of electric shock
................
Direct Current
...............
Volts
........................
Revolutions or Reciprocations per Minute
............
Millimeter
..............
Foot-Pound
..............
1. Square drive
2. Main Switch
3. Forward/Reverse Rod
•