Fellowes Lotus VE Bedienungsanleitung Seite 4

ASSEMBLY CONTINUED
STEP 4
Attach the Platform
STEP 5
Attach VESA Assembly to Tower Pole
bracket on the front-side of the tower pole and the support bar
on the rear. Tigthen knobs to secure Assembly to pole.
bracket on the front-side of the tower pole and the dual cross bar
on the rear. Tighten knobs to secure Dual Assembly to pole.
STEP 6
Attach Monitors
Do not tighten all the way.
Hook the monitor onto the VESA Assembly and add two additional
M4x12mm bolts to the bottom two holes. Tighten all four bolts.
use the provided 13mm Hex Wrenches
STEP 7
Attach the Lever to the Platform
bolts and M4x55mm Allen Key.
4
H
D
A
G
A
K
M
G
L
M
H