Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DESCRIPTION OF THE BODY STIM
A. Functions of the main unit
1. Output socket: hole for connecting the electric cable to produce the electric signal.
2. LCD screen: real-time display of the operating status of the appliance.
3. Intensity display window: real-time intensity display.
4. Intensity adjustment button ("intensity/power»): OFF scale from 1 to 10. Turn the switch clockwise to activate the
device; the intensity increases as you go up scale and decreases as you go down the scale, until the device is finally
deactivated.
5. Time selection button: makes it possible to adjust the operating time of the appliance.
6. Manual mode selection button: the appliance has six manual modes, i.e.:
• Hammering
tapping
• Acupuncture
acupuncture
• Naprapathy
kneading
• Cupping
application of suction pads (or pumping)
• Scraping
Scratching
• Massage
massage
Press the button once; the mode is modified in the order stated above. The LCD arrow will indicate the function mode
selected in a synchronised manner.
7. Automatic mode selection button: the automatic modes are as follows:
7.1. Auto I: Muscle development
7.2. Auto II: Figure slimming
7.3. Auto III: Neck/shoulders
7.4. Auto IV: Back/Legs
Press the button once; the mode is modified in the order stated above. The LCD arrow will indicate the automatic mode
selected in a synchronised manner.
8. Repeat button: press the Repeat button; the LCD screen will display "REPEAT". The appliance will continue to generate
the same signals, i.e. it will maintain the same sensitivity. Press the Repeat button again; the LCD screen will no longer
display "REPEAT". The output signals will then be modified every 15 seconds by the appliance.
[1]
[6]
[5]
[7]
[2]
[6.
]
1
[6.
]
2
[6.
]
[3]
3
[4]
[6.
]
4
[8]
[6.
]
5
[6.
]
6
[7.
]
1
[7.
]
2
[7.
]
3
[7.
]
4
Body Stim
EN
5
Werbung
Inhaltsverzeichnis
