Maxattach Nas 4100 Quick Start Card; Unit Information; System Requirements - Maxtor MaxAttach NAS 4100 Schnellstartkarte

MaxAttach NAS 4100 Quick Start Card

Thank you for choosing Maxtor's MaxAttach
to verify the contents in your box and note the model and serial number of your
MaxAttach for future reference. The procedures outlined here assume that you
are familiar with networking and system administration basics. If not, please refer
to the Installation Guide on the enclosed MaxAttach NAS 4100 CD.
Box Contents
• MaxAttach NAS 4100 file server
• Quick Start Card
• MaxAttach NAS 4100 End User License Agreement
• Power cord
• CAT-5 Ethernet cables (2)
• Mounting ears (2) with screws
• Rubber feet (4)
• MaxAttach NAS 4100 CD containing:
• MaxNeighborhood
• MaxAttach NAS 4100 documentation
• 1Safe ™ for MaxAttach client backup software CD

Unit Information

Please record the following information:
Model Number: _____________________________________
Serial Number: ______________________________________

System Requirements

It will be necessary for your workstation to have the following:
• Windows 95/98/Me/NT(SP5)/2000
• Internet Explorer v4.01 SP1 or above
• Network Interface Card (NIC)
• Client for Microsoft Networks enabled over TCP/IP
• CD-ROM Drive
™ Setup and Discovery Wizard
™ NAS 4100 file server. Take a moment
Page 1