Hardware Installation - Air Live WFP-101U v2 Kurzanleitung

Hardware Installation

1. Unpack the MFP Server package and verify that all the items listed in the previous section are provided.
2. Plug the USB cable to the MFP Server with the MFP or printer that you want to share on the network.
3. Connect the MFP Server to your network by attaching the network cable to the network port of the MFP
server.
4. Connect the power adapter to the MFP Server. The MFP Server will perform the Power-On-Self-Test
(POST) after it is powered on. When the Status LED is unlighted, the MFP Server is ready.
Note:
You must use the power adapter shipped along with the MFP Server, do NOT use any other power
adapter from other sources.
To prevent the compatibility problem between MFP Server and a few MFP or printer, it is
recommended that you power on the MFP Server before the MFP or printer.
English
4
WFP-101U v2