Safety Instruction - GYS NOMAD POWER PRO 700 Bedienungsanleitung

Translation of the original instructions
EN
NOMAD POWER PRO 700

SAFETY INSTRUCTION

This manual includes guidelines on the operation of your device and
the precautions to follow for your own safety. Ensure it is read carefully
before first use and keep it handy for future reference. These instructions
should be read and understood before anyone operates the product.
Any modifications or maintenance that are not specified in the manual
should not be undertaken. The manufacturer is not liable for any injury
or damage due to non-compliance with the instruction manual. In case
of problems or uncertainties, please consult a qualified person that is
able to handle the device correctly. This device should only be used
for start-up or power supply within the limits indicated on the device
and in the manual. The safety instructions must be followed. In case of
improper or unsafe use, the manufacturer cannot be held responsible.
Device suitable for indoor use only. Do not expose to rain or excessive
moisture.
Jump for 12V vehicles only, it would be hazard if for other jumping. It
is forbidden to use for other machines such as aircraft, ship and so on.
This device may be used by children from age 8 and by persons with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge, provided that they are under supervision or have been
told how to use the device safely and are aware of the potential risks.
Children must not use the device as a plaything. Cleaning and servicing
tasks may not be carried out by children unless they are supervised.
Do not use any charger other than the one supplied with the machine to
charge the batteries.
Use the jumper cable provided with this unit only.
Do not operate the device with a damaged power supply cord or a
damaged mains plug.
Do NOT operate the product in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust
Do not cover the device.
Do not place the device near a fire or subject it to heat or to longterm
temperatures exceeding 70°C
The automatic mode of operation and usage restrictions are explained
below in these operating instructions.
Make sure the BLUE plug of the jumper Cable is plugged fully into jum-
ping socket, Otherwise, the blue plug would be melted.
Make sure to check all the battery connections are CLEAN before Jump
Starting! Make sure the battery clamps are well connected! If the batte-
ry terminals on the vehicle are dirty or corroded, the power of the unit
will be lessened.
Make sure someone should be within range of your voice or close
enough to come to your aid when working with batteries
Do NOT connect the two clamps together.
8