Chapter 2 : Technical Description - Analog Way Rk251 Bedienungsanleitung

Chapter 2 : TECHNICAL DESCRIPTION

INPUTS:
AUDIO MUTE:
EFFECT:
(CUT / FADE / TITLE)
TAKE:
SELECT:
-, +/ON:
MIN / MAX LED:
IMAGE ADJUST:
MANUAL FADE:
NOTE: The CONTRAST, BRIGHTNESS, and HUE are not available for a selected computer input (displayed).
NOTE: Pushing quickly on the -/+ push buttons allows to quickly move the adjustments (5 by 5 steps).
PAGE 6
Computer and video input selection.
Pre-select an input with its corresponding push button (LED = blinking) and push on the CUT
button to display the input (LED = ON).
Switch to turn OFF the audio output.
Switching effect selection. See Chapter 3 :OPERATING MODE.
Switches between 2 input sources. See Chapter 3 :OPERATING MODE.
IMAGE ADJUST selection (Short push).
IMAGE PRESET (Long push = 3 seconds), allows to recall the factory values of the
CONTRAST, BRIGHTNESS and HUE for the selected (displayed) input.
Push buttons to increase or decrease the level of each image adjustments.
• LED ON = Adjustments' limits have been reached,
• LED BLINKING = Level is increased or decreased.
Adjustments are active only for the selected (displayed) Video input. Choose an adjustment
with the SELECT button and control the level with the - & +/ON switches :
• CONTRAST:
Contrast adjustment.
• BRIGHTNESS: Brightness adjustment.
• HUE:
Tint of picture (NTSC only) adjustment.
• AUDIO OUT:
Main audio level adjustment (MASTER VOLUME).
• FADE DELAY: Fading time adjustment (0.5, 1, 2, 3, 4, 5 sec.).
• BREAKAWAY: LED "ON (+)" is OFF ⇒ Auto follow mode, LED "ON (+)" is ON ⇒
The audio of the selected input is permanently diffused.
2 Push buttons to manually Fade between two input sources.
REMOTE KEYPAD FOR SMART FADE™