1) Lower the upper section of the tripod.
2) Remove the top supporting rod from the top of the tripod and lower the screen until it is fully retracted into its
housing.
3) Hold down the latch, pull the screen housing out of the tripod socket and put it back into a vertical position.
4) Now retract the tripod legs.
Model
Format:
Type:
Projection type:
Diagonal:
Screen area:
Dimensions (D x W x H):
Transport dimensions (D x W x H):
Surrounding border:
Gain:
Viewing angle:
Base material:
Screen surface:
Specifications are subject to change without notice due to product improvements.
DISASSEMBLY
TECHNICAL SPECIFICATIONS
80901200
2.15 m (85")
172 x 130 cm
800 x 1875 x 2250 mm
170 x 80 x 1940 mm
11 • EN
4:3
Mobile roller screen D
Front projection
800 x 2155 x 2480 mm
170 x 80 x 2205 mm
3.5 cm
1.2
160°
PVC
Matt, white
80901203
2.50 m (100")
200 x 150 cm