General Description - Gewiss Chorus GW 10 782 Bedienungsanleitung

The EIB 4 channel push-button panel – flush mount allows you to send commands to
other actuator devices using the KNX/EIB, through which it connects to the Building
Automation system.
The push-button panel is powered by the bus line and each channel is fitted with two
LEDs, 1 night localisation LED (amber LED) and a status LED with functions that can be
configured (green LED). The push-button panel is fitted inside a standard flush-mount box,
mounted on Chorus supports in the space of two modules.
Each of the 4 buttons is configured by the ETS software to achieve one of the functions
listed below.
Management of input/Transmission of objects to the bus:
- edge management with sending of commands (1 bit, 2 bit, 1 byte, 2 byte)
- edge management with sequence sending (1 bit, 2 bit, 1 byte, 2 byte) with 4
communication objects and timing intervals
- short/prolonged pressure management with command transmission (1 bit, 2 bit, 1 byte,
2 byte)
- button enabling/disabling command
Scenes:
- scene management with a 1 byte object
- sending of scene memorising command
- scene sequence management
Priority controls:
- send priority controls
Shutter/blind control:
- with single or double button
Dimmer control:
- with single or double button
- with stop or cyclic start telegram
- send light intensity value (0%.-100%)

GENERAL DESCRIPTION

Functions
12