Product Description And Specifications; Intended Use; Product Features - Bosch GBL 18V-120 Professional Originalbetriebsanleitung

tery pack may create a risk of fire when used with another
battery pack.
Use power tools only with specifically designated bat-
u
tery packs. Use of any other battery packs may create a
risk of injury and fire.
When battery pack is not in use, keep it away from
u
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
Under abusive conditions, liquid may be ejected from
u
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
u
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
Do not expose a battery pack or tool to fire or excess-
u
ive temperature. Exposure to fire or temperature above
130°C may cause explosion.
Follow all charging instructions and do not charge the
u
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
Service
Have your power tool serviced by a qualified repair
u
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of bat-
u
tery packs should only be performed by the manufacturer
or authorized service providers.
Safety instructions for blower
Do not blow any harmful substances, e.g. beech or oak
u
wood dust, rock dust or asbestos. These substances are
classified as carcinogenic.
Do not blow any liquids. The penetration of liquids in-
u
creases the risk of an electric shock.
Pay attention that bystanders are not injured by for-
u
eign objects that are blown off by the product.
Keep your fingers away from the openings of the
u
power tool during operation. Only operate the blower
with a nozzle attached. The rotating fan can injure you.
Ensure that the workplace is well ventilated.
u
Do not let children use the power tool unsupervised.
u
Children are at risk of injuring themselves this way.
Wear additional personal protective equipment such
u
as protective glasses and a protective mask. Wearing
personal protection equipment appropriate to the condi-
tions reduces your exposure to hazardous substances.
Bosch Power Tools
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for blowing away non-harmful
substances (e.g. sawing debris, metal chips, stone dust,
etc.) produced during sawing, drilling or grinding. Drill holes
can also be blown out with the appropriate accessories.
The power tool is not suitable for blowing hot, flammable or
explosive materials.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch with stage selector
(2) Handle
A)
(3) Battery
(4) Air inlet
(5) Motor housing
(6) Nozzle
(7) Battery release button
(8) Recess for accessory connection
(9) Extension tube
English | 11
1 609 92A 4YD | (05.09.2019)