BOMANN KSW 345 Benutzerhandbuch Seite 39

PROBLEM POSSIBLE CAUSE
The ventilation The temperature has been pro-
runs often or grammed to a very low tempe-
always. rature, or the difference between
the ambient and programmed
temperature is very large.
Water on the Is the temperature control set pro-
bottom. perly?
Is the drain opening logged?
Interior lamp Is the plug not connected to the
does not work. mains?
Is the illuminant defect?
Note. On days of high humidity, condensation might occur on the outer surface of the
device. This is no malfunction; you may simply wipe the water off.
If a problem still persists after following the steps above, please contact your distribu-
tor and/or a technician.
Are you interested in other Bomann products? Please visit our website:
SOLUTION
Then it is normal that the ventila-
tor is running. It is not a malfunc-
tion.
Check the temperature settings.
Clean the drain opening with a
pipe cleaner or knitting needle.
Connect the plug properly to the
socket.
Contact a technician.
www.bomann.de
39
06/2013