Kruger&Matz Air Share2 KM0365 Bedienungsanleitung Seite 15

Owner's manual
5. Press the Submit button. The dongle will reboot with
new password. After password change connect to the
dongle using new password.
Reseting the dongle
If the device has crashed or has to be disconnected from
network, press and hold the reset button for about 5 seconds.
The device will perform reset and reboot with default settings.
Firmware update
1. Connect the device to WiFi network. Perform steps from
"Connecting the dongle to the WiFi network" paragraph.
2. The device will autmatically check for firmware updates.
3. If there is an update available, the device will
automatically download and install it.
4. After installation the device will perform a reboot.
Attention: During an update do not disconnect the device from
power supply and network. Do not use the device during an
update.
EN
15