Power Supply; Specifications - DJI FPV GOGGLES Kurzanleitung

Power Supply

Use the power cable (included) to connect the power port of the goggles to an external
power supply.
Activation
When powered on, connect the goggles to a computer and run DJI ASSISTANT
activation. Download DJI Assistant 2 at https://www.dji.com/fpv/downloads
Linking
1. Power on the air unit and the DJI FPV
Goggles.
2. Press the link button on the air unit and
the goggles.*
3. The linking status indicator of the air
unit turns solid green. The goggles stop
beeping when successfully linked and
the video display is normal.
If you need to use the DJI FPV Goggles and remote controller together, the air unit must be
linked to the goggles before the remote controller.
Controls
5D Button
Toggle to scroll through the menu.
Press to confirm.
Record Button
Press to start or stop video recording.
Back Button
Press to return to the previous menu
or exit the current mode.

Specifications

Weight
Dimensions
Screen Size
Screen Resolution (Single Screen)
Communication Frequency
Transmitter Power (EIRP)
Live View Mode
Video Format
Supported Video Play Format
Operating Temperature
Power Input
4
* When ready to link, the devices will give the following
indication:
Air unit: the linking status indicator turns solid red.
Goggles: the goggles beep continually.
Channel Adjustment Buttons
Press to switch channels.
Channel Display
Displays the current channel.
Approx. 420 g (headband and antennas included)
184×122×110 mm (antennas excluded),
202×126×110 mm (antennas included)
2-inch × 2
1440 × 810
5.725-5.850 GHz
FCC: <30 dBm; CE: <14 dBm; SRRC: <19 dBm
Low Latency Mode (720p 120fps),
High Quality Mode (720p 60fps)
MP4 (Video format: H.264)
MP4, MOV, MKV (Video format: H.264;
Audio format: AAC-LC, AAC-HE, AC-3, MP3)
32° to 104° F (0° to 40° C)
7.4-17.6 V
TM 2 for