Product Description - 3M DBI Sala Truck Hitch Davit Mount System Sicherheitshinweise & Installationshandbuch

;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 3) at the back of this manual.

PRODUCT DESCRIPTION:

Figure 1 illustrates the Truck Hitch Davit Mount System. This system must be used with a vehicle of suitable weight to ensure
user safety.
Figure 2 illustrates the components of the Truck Hitch Davit Mount. See Table 1 for Component Specifications.
Component Specifications:
Figure 2
Reference Component
Center Section
A
Leg Assembly
B
C Base Extension
D Height Adjuster
E Hitch Ball Receiver
F 8000116 (Sold separately)
Vehicle Specifications:
Weight Minimum vehicle weight of 925 kg (2,039 lbs).
Receiver Hitch receiver must be 50 mm, 2", 1 7/8" ball size.
Style
System Specifications:
Working Zone Rated for fall arrest and rescue in front of legs. See Figure 5.
Working Structure supporting the Fall Arrest System must withstand a 13.8 kN (3,100 lbs) vertical load.
Structure
Compatibility The Davit Bases covered in this instruction are compatible with 3M™ DBI-SALA
Short Reach and Long Reach Davit Systems.
System Weight 40.8 kg (90 lbs)
Dimensions See Figure 3 for the dimensions of the Truck Hitch Davit Mount.
Weight Capacities:
Material Handling Capacity
Table 1 – Specifications
205 kg (452 lbs)
11
Materials
Aluminum- Powder coated
High-Density polyethylene
Aluminum- Powder coated
Carbon Steel- Zinc
Aluminum-Powder coated
Carbon Steel- Zinc
Aluminum- Powder coated
Carbon Steel- Powder coated
Aluminum- Powder coated
High Capacity (HC)
®