Aiwa LED-325HDSMART Bedienungsanleitung Seite 7

12
en
BATTERY INSTALLATION & BASIC OPERATION
Battery must be inserted correctly to avoid damage to the remote control. Always remove the battery
when the remote control will not be used for a long period of time, as this will cause leakage to the
battery and subsequently damage to your set.
BATTERY INSTALLATION
Slide out cover and install
2 AAA TYPE
polarity markings inside the compartment shown:
TV CONTROL BUTTON
Notes:
• The TV control button must be 'ON' in order for the remote control to operate.
• Do not make remote control vibrate violently.
• Don't splash liquid on the remote control, also do not put the remote control in high humidity place.
• Do not place remote control under direct sunlight which will cause deformation of the unit by heat.
• When the remote sensor is under direct sunlight or strong lighting, the remote control will do not
work. lf so please change the lighting or TV's position, or operate the remote control closer to the
remote sensor.
• If the distance required between the remote control and the appliance decreases, the batteries
are exhausted. In this case replace the batteries with new ones.
• Do not use different types of batteries (for example, Manganese and Alkaline batteries) together.
• The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
• Please dispose batteries abide by relevant environmental protection regulation.
batteries (included), making sure to match the
TV CONTROL BUTTON
1. In standby mode, press TV control button
to turn on theTV.
2. In working status, press TV control button
to turn the TV to standby mode.
E-MANUAL
HOW TO USE E-MANUAL
E-Manual is built into your TV and can be displayed on the screen.
To learn more about your TV features, access your E-Manual by referring to the following.
1. Press MENU button to access the main menu.
2. Press • / button to select the submenu SETUP.
3. Press button to enter the SETUP menu.
4. Press / button to select "E-Manual''.
5. Press OK button to enter the" E-Manual'' to check the instructions of basic function.
6. The following buttons of remote control are used to help you operate the TV set in E-Manual.
13