Inhaltsverzeichnis
Werbung
2.3 The Rear Ports
PORT
Line (RJ11)
Phone
LAN
Reset
POWER (jack)
POWER Switch
MEANING
Connect the supplied RJ-11 cable to this port
when connecting to the ADSL/telephone
network.
Connect RJ-11 cable to this port when
connecting to an analog phone set.
Connect an UTP Ethernet cable to the LAN
port when connecting to a PC or an
office/home network of 10Mbps or 100Mbps.
After the device has turned on, press it to
reset the device or restore to factory default
settings. The operation is as below:
0-3 seconds: reset the device
3-6 seconds: no action
10 seconds or above: restore to factory
default settings (this is used when you can
not login to the router, e.g. forgot the
password)
Connect the supplied power adapter to this
jack.
A Power ON/OFF switch
ENGLISH
15
Werbung
Inhaltsverzeichnis
