Forest-Master QUICK FIRE Handbuch Seite 5

STEP 3:
For the greatest stability, it is
recommended that the saw
horse is used on a ground
surface where the ground
anchors can be deployed.
Lift the front of the
sawhorse, rotate the ground
anchors from the stored
position so that they point
down and push them into the
ground.
Quick Fire Sawhorse
STEP 4:
Insert the log through the teeth
in the direction shown until
approximately 1/3 of the log
length is forward of the log
support frame. The log should
be angled so that the short end
of the log is slightly lower than
the rear.
5