Lutron QS Serie Installations- Und Bedienungsanleitung

QS DMX Control Interface
Installation and Operation Instructions
Occupant Copy
The QSE-CI-DMX control interface allows zones on a GRAFIK
Eye QS control unit or Quantum
®
DMX512-controlled devices. Any zone on the GRAFIK Eye
QS or Quantum processor can be mapped to either a single
®
DMX512 channel or to three separate DMX512 channels for
RGB/CMY color-control applications.
Key Features
processor to any single DMX512 channel
processor simultaneously to three DMX512 channels for RGB/
CMY color-control
or Quantum zone intensities to RGB/CMY values
®
For GRAFIK Eye QS Systems: RGB/CMY table can be
®
customized by using the Lutron QS Color Configuration Tool (PC
and on www.lutron.com/qs)
For Quantum Systems: RGB/CMY table can be customized by
®
using the Lutron Q-Design software
TM
QS System
Lutron QS System components communicate over the highly
designing and installing QS system components:
Dimensions
1.0 in
LEDs and
(26.9 mm)
addressing
switches
on this side
2.47 in
(62.74 mm)
2.47 in
(62.74 mm)
on this side
Please Read
processor to control
®
®
QS control unit or Quantum
® ®
QS control unit or Quantum
® ®
®
4.26 in
Mounting Holes
(133.6 mm)
3.75 in
(95.3 mm)
QSE-CI-DMX
SELV / PELV / NEC
®
Requirements
- At least one GRAFIK Eye
Note:
may be required if the total power draw units consumed
by QS accessories is greater than the supply capacity of
the GRAFIK Eye
or:
QS
- A Quantum processor
®
Note: A Quantum
if the total power draw units consumed by QS accessories is
greater than the supply capacity of the Quantum
see table on page 2
Mounting Options
Choose a mounting method below. Mount the control interface in
an accessible location.
connecting cables.
A.
Control
Interface
5.26 in
Mounting
Class 2 Device 24–36 V- 60 mA
either:
QS control unit wired to the
®
®
Light Management Hub may be required
®
/ PELV / NEC
®
B.
C.
processor
®
Class 2):
1