Kiwi KVC 4101 Gebrauchsanweisung Seite 6

OPERATING INSTRUCTIONS
Note: Always remove the power plug from the wall outlet before assembling or removing accessories.
Inserting the Metal Handle Into the Main Body
• On the hand vacuum handle, pull open the handle port (Fig.1) and insert the extension tube until the
locking clip is sitting firmly on the handle. (Fig.2)
Fig. 1
Handle Port
• Push the handle port closed so that it snaps shut. (Fig. 3 & 4)
Fig. 3
Winding & Unwinding the Power Cord
This vacuum cleaner is equipped with a convenient cord storage feature. This unit also has a quick
release cord hook
• Wind power cord around the quick release cord hook and the cord winding hook. (Fig. 6) To unwind
the power cord, simply twist the quick release cord hook to the left or right.
Fig. 6
Power Switch
• The On/Off power switch has two different positions. (Fig. 7)
• Push on the "I" side to turn the vacuum ON.
• Push on the "O" side to turn the vacuum OFF.
Locking Clip
Push handle port so
that it snaps shut.
Quick Release Cord Hook
Cord Winding Hook
Fig. 2
Fig. 4
Caution: The suction hole opening must be
open and free of any obstructions at all times.
Otherwise, the motor will overheat and could
become damaged.
6
Push firmly into handle
On Position
Off Position
Fig. 7