Sight mark SM19024 Gebrauchsanleitung Seite 10

2) Place the body of the magnifier onto the mount base. Position the top of the mount over the magnifier body,
aligning it with the mount base.
3) Re-tighten the bolts with the hex wrench until they are secure. DO NOT over tighten, as this may cause damage
to the magnifier.
To mount onto your weapon:
1) MAKE SURE YOUR FIREARM IS UNLOADED. DO NOT attempt to mount the magnifier configuration onto a
loaded weapon.
2) Release the quick-detach lever (1).
7