Connection And Operation - PeakTech 4123 Bedienungsanleitung

5. Connection and operation

1. Make sure, that AC power source fits the input of voltage unit
labelled (230V, 50/60 Hz) and plug it in the AC outlet.
2. First put in the unit and then turn the equipment ON.
3. Connect the equipment to the unit.
4. When an operation is finished, turn off the equipment first and
then put out the unit.
All rights, also for translation, reprinting and copy of this manual or
parts are reserved. Reproductions of all kinds (photocopy, microfilm
or other) only by written permission of the publisher.
This manual is according the latest technical knowing. Technical
alterations reserved.
®
© PeakTech 10/2019 Th/Pt/Mi
PeakTech Prüf- und Messtechnik GmbH – Gerstenstieg 4 –
DE-22926 Ahrensburg / Germany
+49-(0) 4102-97398 80 +49-(0) 4102-97398 99

info@peaktech.de

www.peaktech.de