Remote Control - Avermedia AVerTV CaptureHD H727E Kurzanleitung

3. Select Remove All  Next OK  Finish.
®
Windows 8
1. Right click on AVer MediaCenter 3D on the Metro Start screen, and click
on Uninstall.
2. In Programs and Features, select AVer MediaCenter 3D 
Uninstall/Change.
3. Select Remove All  Next OK  Finish.

Remote Control

After installing drivers and applications, you can use a remote control to turn on/off the
programs, select channels, adjust volume and so on.
 Remote Turn-on Function:
remote control to turn on the PC and the application. To use, just point the remote
control at the receiver and press
button again to turn on the application.
NOTE:
1. The Remote Turn-On Function may be disabled depending on your PC motherboard.
2. To enable the Remote Turn-On Function, please make sure you've enabled the PCI
wake-up function in the BIOS setting. To do so, first enter the BIOS setting; then choose
Power Management Setup and set PCI device to "Power On" (please note that the BIOS
setting and descriptions may vary).
Quick Installation Guide
When the PC is in turn-off mode, users can use
button to turn on the PC. Then press
ENG-5