Safety Rules - Faro 010.000 Gebrauchsanweisung

FARO laboratory handpieces conform to
Before installing the handpiece read this manual carefully
TABLE OF CONTENTS

Safety rules

Features
Operating Instructions
Maintenance
Troubleshooting
Technical particulars
Guarantee Certificate
SAFETY RULES
Follow all the instructions set forth in this manual.
 To avoid undue wear on the handpiece do not brake rotation by using the collet
opening lever for any reason.
 Do not open the collet when the shaft is rotating.
 Do not use the handpiece with the front ring nut partially unscrewed.
 The handpiece must not rotate without the fitted tool.
 It is recommended to wear protective clothing, eyeglasses and gloves while using
thehandpiece.
 Do not attempt any maintenance while the shaft is rotating.
 Insert only tools of the correct diameter in the handpiece collet.
 Do not attempt to repair the handpiece personally but only perform those operations
explained in the manual; in all other cases call on our Service Department.
 Use only tools designed to resist a rotation speed higher than that of the handpiece (see
the tool manual).
 When working on crumbly materials it is recommended to use an exhaust located near
the place the tool is working in.
CEE machine directive 89 / 392
IMPORTANT !
13
14
15
16
page 15
page 17
page 18
page 21
page 22
page 23
page 24