Synchronization Function - Tom Audio TG-200 eTour Bedienungsanleitung

User Manual - TOM-Audio TG-200
4.6.1 Increase the transmittion power of the transmitter TG-200
If necessary, the transmitting power (range) of the transmitter TG-200T can be increased.
Attention: This is only allowed in the national frequency range 001 (823 Mhz - 832
Mhz) when used in Germany. When using the system, the transmission pow-
er must not be increased.
To set the transmission power, proceed as follows:
1. Push the on/off button (
five times and keep the buttons pressed for the
fifth time for about three seconds.
2. The channel symbol disappears and the diaplsy shows the current selected trans-
mittion power of P01 – P05.
3. Now select with the increase ans dicrease the desired transmittion power. P05
stands for the highest and P01 for the lowest transmission power.
Transmission powers:
• P01: 3,16 mW
• P02: 10 mW
• P03: 25,11 mW
• P04: 39,81 mW
• P05: 89,12 mW

4.7. Synchronization function

Once the transmitter and receiver are set to the same channel, the channel of the recei-
ver automatically adjusts to that of the transmitter.
Example: Transmitter and receiver are both set to channel five. The station changes its
channel from five to eight. The channel of the receiver automatically goes on channel
eight. The radio connection is restored
44
or ) plus the increase-button simultaneously
44